Sliding Gate Operators

DKC400 seriesnew.GIF (1512 字节)

DKC400.jpg (14524 字节)
  • Power supply: AC 220V/50Hz
  • Input power: 300W
  • Input torque: 14N.m
  • Output rate speed: 42rpm
  • Opening speed: 12m/min
  • Max. gate weight: 400Kg
  • Environmental temperature: -40°C to +75°C
  • Noise: < 59dB
  • Gear-driver with Magnetic limit switch
  • The self-locking electromechanical gearmotor keeps the gate completely closed
  • Safety Obstruction Reverse ( a infrared beam must be installed )
  • Overheat & Overload dual protection
  • Emergency release key in case of power failure
  • Control panel wiring are available to safety device, alarm lamp & remote control

L200dc.jpg (8558 字节)

Gear wheel & spring switch

 The sliding gate operators are used to drive sliding gates for industrial, commercial and residential uses. The operators can be fitted with gear wheel or chain wheel according to your needs, and featured with powerful starting strength, capable of overwork at short time. In case of power failure, an emergency release key allows operate gate manually.

Advanced Features:

ball2.gif (1499 字节)   Gear-driver or chain-driver is optional
ball2.gif (1499 字节)  Magnetic or spring limit switch is optional
ball2.gif (1499 字节)  The self-locking electromechanical gearmotor keeps the gate completely closed
ball2.gif (1499 字节)  Motor torque adjustment
ball2.gif (1499 字节)  Stop on closing if it hits obstruction
ball2.gif (1499 字节)  Overheat & Overload dual protection
ball2.gif (1499 字节)  Emergency release key in case of power failure
ball2.gif (1499 字节)  Control panel wiring are available to safety device, alarm lamp and remote controller
ball2.gif (1499 字节)  Available in 24VDC version, which can be operated by storage battery

L110.jpg (8397 字节)

Chain wheel & spring switch

L200.gear.jpg (9758 字节)

Gear wheel & magnetic switch

L200.chain.jpg (9649 字节)

Chain wheel & magnetic switch

sliding1.JPG (10140 字节)

Sliding gate

sliding2.JPG (10671 字节)

Sliding extension gate

Gear Rack:

1005*30*12 mm
Module = 4
Galvanized
4 pcs in 1 carton

Rack.jpg (8842 字节)

Gear Rack
Controller.jpg (12170 字节) Electric Controller:

Two types is optional:
1. Remote Controller inside
2. With button switch

Technical Specification:

Model L200 series L110 series K750 series L200DC
Power supply 220V/50Hz 110V/60Hz 3P-380V/50Hz 24Vdc
Motor speed 1400rpm 1650rpm 2800rpm 1800rpm
Motor power 400w 400w 525w 120w
Output torque 14N.m 14N.m 14N.m 18N.m
Max.gate weight 600kg 600kg 600kg 750kg
Opening speed 12m/min 12m/min 18m/min 12m/min
Reducton ratio 1:30 1:30 1:30 1:30